Module d1_pac::usb1::ohci_root_hub_partition::hc_rh_status
source · Expand description
OHCI Root Hub Status Register
Structs§
- OHCI Root Hub Status Register
- Register
hc_rh_status
reader - Register
hc_rh_status
writer
Type Aliases§
- Field
clear_remote_eakeup_enable
reader - (write)ClearRemoteWakeupEnable - Field
clear_remote_eakeup_enable
writer - (write)ClearRemoteWakeupEnable - Field
over_current_indicator_change
reader - This bit is set by hardware when a change has occurred to the OverCurrentIndicator field of this register. The HCD clears this bit by writing a ‘1’. Writing a ‘0’ has no effect. - Field
over_current_indicator_change
writer - This bit is set by hardware when a change has occurred to the OverCurrentIndicator field of this register. The HCD clears this bit by writing a ‘1’. Writing a ‘0’ has no effect. - Field
over_current_indicator
reader - This bit reports overcurrent conditions when the global reporting is implemented. When set, an overcurrent condition exists. When cleared, all power operations are normal. If per-port overcurrent protection is implemented this bit is always ‘0’ - Field
over_current_indicator
writer - This bit reports overcurrent conditions when the global reporting is implemented. When set, an overcurrent condition exists. When cleared, all power operations are normal. If per-port overcurrent protection is implemented this bit is always ‘0’ - Field
r_device_remote_wakeup_enable_w_set_remote_wakeup_enable
reader - (read)DeviceRemoteWakeupEnable - Field
r_device_remote_wakeup_enable_w_set_remote_wakeup_enable
writer - (read)DeviceRemoteWakeupEnable - Field
r_local_power_status_w_clear_global_power
reader - (Read)LocalPowerStatus - Field
r_local_power_status_w_clear_global_power
writer - (Read)LocalPowerStatus - Field
r_local_power_status_w_set_global_power
reader - (read)LocalPowerStatusChange - Field
r_local_power_status_w_set_global_power
writer - (read)LocalPowerStatusChange