#[doc = "Register `emac_basic_ctl1` reader"]
pub struct R(crate::R<EMAC_BASIC_CTL1_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<EMAC_BASIC_CTL1_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<EMAC_BASIC_CTL1_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<EMAC_BASIC_CTL1_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `emac_basic_ctl1` writer"]
pub struct W(crate::W<EMAC_BASIC_CTL1_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<EMAC_BASIC_CTL1_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<EMAC_BASIC_CTL1_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<EMAC_BASIC_CTL1_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `soft_rst` reader - Soft Reset all Registers and Logic"]
pub type SOFT_RST_R = crate::BitReader<SOFT_RST_A>;
#[doc = "Soft Reset all Registers and Logic\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum SOFT_RST_A {
#[doc = "0: `0`"]
NO_VALID = 0,
#[doc = "1: `1`"]
RESET = 1,
}
impl From<SOFT_RST_A> for bool {
#[inline(always)]
fn from(variant: SOFT_RST_A) -> Self {
variant as u8 != 0
}
}
impl SOFT_RST_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> SOFT_RST_A {
match self.bits {
false => SOFT_RST_A::NO_VALID,
true => SOFT_RST_A::RESET,
}
}
#[doc = "Checks if the value of the field is `NO_VALID`"]
#[inline(always)]
pub fn is_no_valid(&self) -> bool {
*self == SOFT_RST_A::NO_VALID
}
#[doc = "Checks if the value of the field is `RESET`"]
#[inline(always)]
pub fn is_reset(&self) -> bool {
*self == SOFT_RST_A::RESET
}
}
#[doc = "Field `soft_rst` writer - Soft Reset all Registers and Logic"]
pub type SOFT_RST_W<'a, const O: u8> =
crate::BitWriter<'a, u32, EMAC_BASIC_CTL1_SPEC, SOFT_RST_A, O>;
impl<'a, const O: u8> SOFT_RST_W<'a, O> {
#[doc = "`0`"]
#[inline(always)]
pub fn no_valid(self) -> &'a mut W {
self.variant(SOFT_RST_A::NO_VALID)
}
#[doc = "`1`"]
#[inline(always)]
pub fn reset(self) -> &'a mut W {
self.variant(SOFT_RST_A::RESET)
}
}
#[doc = "Field `rx_tx_pri` reader - RX TX DMA Priority"]
pub type RX_TX_PRI_R = crate::BitReader<RX_TX_PRI_A>;
#[doc = "RX TX DMA Priority\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum RX_TX_PRI_A {
#[doc = "0: `0`"]
SAME = 0,
#[doc = "1: `1`"]
RO_T = 1,
}
impl From<RX_TX_PRI_A> for bool {
#[inline(always)]
fn from(variant: RX_TX_PRI_A) -> Self {
variant as u8 != 0
}
}
impl RX_TX_PRI_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> RX_TX_PRI_A {
match self.bits {
false => RX_TX_PRI_A::SAME,
true => RX_TX_PRI_A::RO_T,
}
}
#[doc = "Checks if the value of the field is `SAME`"]
#[inline(always)]
pub fn is_same(&self) -> bool {
*self == RX_TX_PRI_A::SAME
}
#[doc = "Checks if the value of the field is `RO_T`"]
#[inline(always)]
pub fn is_ro_t(&self) -> bool {
*self == RX_TX_PRI_A::RO_T
}
}
#[doc = "Field `rx_tx_pri` writer - RX TX DMA Priority"]
pub type RX_TX_PRI_W<'a, const O: u8> =
crate::BitWriter<'a, u32, EMAC_BASIC_CTL1_SPEC, RX_TX_PRI_A, O>;
impl<'a, const O: u8> RX_TX_PRI_W<'a, O> {
#[doc = "`0`"]
#[inline(always)]
pub fn same(self) -> &'a mut W {
self.variant(RX_TX_PRI_A::SAME)
}
#[doc = "`1`"]
#[inline(always)]
pub fn ro_t(self) -> &'a mut W {
self.variant(RX_TX_PRI_A::RO_T)
}
}
#[doc = "Field `burst_len` reader - The burst length of RX and TX DMA transfer"]
pub type BURST_LEN_R = crate::FieldReader<u8, u8>;
#[doc = "Field `burst_len` writer - The burst length of RX and TX DMA transfer"]
pub type BURST_LEN_W<'a, const O: u8> =
crate::FieldWriter<'a, u32, EMAC_BASIC_CTL1_SPEC, u8, u8, 6, O>;
impl R {
#[doc = "Bit 0 - Soft Reset all Registers and Logic"]
#[inline(always)]
pub fn soft_rst(&self) -> SOFT_RST_R {
SOFT_RST_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - RX TX DMA Priority"]
#[inline(always)]
pub fn rx_tx_pri(&self) -> RX_TX_PRI_R {
RX_TX_PRI_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bits 24:29 - The burst length of RX and TX DMA transfer"]
#[inline(always)]
pub fn burst_len(&self) -> BURST_LEN_R {
BURST_LEN_R::new(((self.bits >> 24) & 0x3f) as u8)
}
}
impl W {
#[doc = "Bit 0 - Soft Reset all Registers and Logic"]
#[inline(always)]
#[must_use]
pub fn soft_rst(&mut self) -> SOFT_RST_W<0> {
SOFT_RST_W::new(self)
}
#[doc = "Bit 1 - RX TX DMA Priority"]
#[inline(always)]
#[must_use]
pub fn rx_tx_pri(&mut self) -> RX_TX_PRI_W<1> {
RX_TX_PRI_W::new(self)
}
#[doc = "Bits 24:29 - The burst length of RX and TX DMA transfer"]
#[inline(always)]
#[must_use]
pub fn burst_len(&mut self) -> BURST_LEN_W<24> {
BURST_LEN_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "EMAC Basic Control Register1\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [emac_basic_ctl1](index.html) module"]
pub struct EMAC_BASIC_CTL1_SPEC;
impl crate::RegisterSpec for EMAC_BASIC_CTL1_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [emac_basic_ctl1::R](R) reader structure"]
impl crate::Readable for EMAC_BASIC_CTL1_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [emac_basic_ctl1::W](W) writer structure"]
impl crate::Writable for EMAC_BASIC_CTL1_SPEC {
type Writer = W;
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets emac_basic_ctl1 to value 0"]
impl crate::Resettable for EMAC_BASIC_CTL1_SPEC {
const RESET_VALUE: Self::Ux = 0;
}