#[doc = "Register `pb_cfg0` reader"]
pub struct R(crate::R<PB_CFG0_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<PB_CFG0_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<PB_CFG0_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<PB_CFG0_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `pb_cfg0` writer"]
pub struct W(crate::W<PB_CFG0_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<PB_CFG0_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<PB_CFG0_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<PB_CFG0_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `pb0_select` reader - "]
pub type PB0_SELECT_R = crate::FieldReader<u8, PB0_SELECT_A>;
#[doc = "\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum PB0_SELECT_A {
#[doc = "0: `0`"]
INPUT = 0,
#[doc = "1: `1`"]
OUTPUT = 1,
#[doc = "2: `10`"]
PWM3 = 2,
#[doc = "3: `11`"]
IR_TX = 3,
#[doc = "4: `100`"]
TWI2_SCK = 4,
#[doc = "5: `101`"]
SPI1_WP_DBI_TE = 5,
#[doc = "6: `110`"]
UART0_TX = 6,
#[doc = "7: `111`"]
UART2_TX = 7,
#[doc = "8: `1000`"]
OWA_OUT = 8,
#[doc = "14: `1110`"]
PB_EINT0 = 14,
#[doc = "15: `1111`"]
IO_DISABLE = 15,
}
impl From<PB0_SELECT_A> for u8 {
#[inline(always)]
fn from(variant: PB0_SELECT_A) -> Self {
variant as _
}
}
impl PB0_SELECT_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> Option<PB0_SELECT_A> {
match self.bits {
0 => Some(PB0_SELECT_A::INPUT),
1 => Some(PB0_SELECT_A::OUTPUT),
2 => Some(PB0_SELECT_A::PWM3),
3 => Some(PB0_SELECT_A::IR_TX),
4 => Some(PB0_SELECT_A::TWI2_SCK),
5 => Some(PB0_SELECT_A::SPI1_WP_DBI_TE),
6 => Some(PB0_SELECT_A::UART0_TX),
7 => Some(PB0_SELECT_A::UART2_TX),
8 => Some(PB0_SELECT_A::OWA_OUT),
14 => Some(PB0_SELECT_A::PB_EINT0),
15 => Some(PB0_SELECT_A::IO_DISABLE),
_ => None,
}
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == PB0_SELECT_A::INPUT
}
#[doc = "Checks if the value of the field is `OUTPUT`"]
#[inline(always)]
pub fn is_output(&self) -> bool {
*self == PB0_SELECT_A::OUTPUT
}
#[doc = "Checks if the value of the field is `PWM3`"]
#[inline(always)]
pub fn is_pwm3(&self) -> bool {
*self == PB0_SELECT_A::PWM3
}
#[doc = "Checks if the value of the field is `IR_TX`"]
#[inline(always)]
pub fn is_ir_tx(&self) -> bool {
*self == PB0_SELECT_A::IR_TX
}
#[doc = "Checks if the value of the field is `TWI2_SCK`"]
#[inline(always)]
pub fn is_twi2_sck(&self) -> bool {
*self == PB0_SELECT_A::TWI2_SCK
}
#[doc = "Checks if the value of the field is `SPI1_WP_DBI_TE`"]
#[inline(always)]
pub fn is_spi1_wp_dbi_te(&self) -> bool {
*self == PB0_SELECT_A::SPI1_WP_DBI_TE
}
#[doc = "Checks if the value of the field is `UART0_TX`"]
#[inline(always)]
pub fn is_uart0_tx(&self) -> bool {
*self == PB0_SELECT_A::UART0_TX
}
#[doc = "Checks if the value of the field is `UART2_TX`"]
#[inline(always)]
pub fn is_uart2_tx(&self) -> bool {
*self == PB0_SELECT_A::UART2_TX
}
#[doc = "Checks if the value of the field is `OWA_OUT`"]
#[inline(always)]
pub fn is_owa_out(&self) -> bool {
*self == PB0_SELECT_A::OWA_OUT
}
#[doc = "Checks if the value of the field is `PB_EINT0`"]
#[inline(always)]
pub fn is_pb_eint0(&self) -> bool {
*self == PB0_SELECT_A::PB_EINT0
}
#[doc = "Checks if the value of the field is `IO_DISABLE`"]
#[inline(always)]
pub fn is_io_disable(&self) -> bool {
*self == PB0_SELECT_A::IO_DISABLE
}
}
#[doc = "Field `pb0_select` writer - "]
pub type PB0_SELECT_W<'a, const O: u8> =
crate::FieldWriter<'a, u32, PB_CFG0_SPEC, u8, PB0_SELECT_A, 4, O>;
impl<'a, const O: u8> PB0_SELECT_W<'a, O> {
#[doc = "`0`"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(PB0_SELECT_A::INPUT)
}
#[doc = "`1`"]
#[inline(always)]
pub fn output(self) -> &'a mut W {
self.variant(PB0_SELECT_A::OUTPUT)
}
#[doc = "`10`"]
#[inline(always)]
pub fn pwm3(self) -> &'a mut W {
self.variant(PB0_SELECT_A::PWM3)
}
#[doc = "`11`"]
#[inline(always)]
pub fn ir_tx(self) -> &'a mut W {
self.variant(PB0_SELECT_A::IR_TX)
}
#[doc = "`100`"]
#[inline(always)]
pub fn twi2_sck(self) -> &'a mut W {
self.variant(PB0_SELECT_A::TWI2_SCK)
}
#[doc = "`101`"]
#[inline(always)]
pub fn spi1_wp_dbi_te(self) -> &'a mut W {
self.variant(PB0_SELECT_A::SPI1_WP_DBI_TE)
}
#[doc = "`110`"]
#[inline(always)]
pub fn uart0_tx(self) -> &'a mut W {
self.variant(PB0_SELECT_A::UART0_TX)
}
#[doc = "`111`"]
#[inline(always)]
pub fn uart2_tx(self) -> &'a mut W {
self.variant(PB0_SELECT_A::UART2_TX)
}
#[doc = "`1000`"]
#[inline(always)]
pub fn owa_out(self) -> &'a mut W {
self.variant(PB0_SELECT_A::OWA_OUT)
}
#[doc = "`1110`"]
#[inline(always)]
pub fn pb_eint0(self) -> &'a mut W {
self.variant(PB0_SELECT_A::PB_EINT0)
}
#[doc = "`1111`"]
#[inline(always)]
pub fn io_disable(self) -> &'a mut W {
self.variant(PB0_SELECT_A::IO_DISABLE)
}
}
#[doc = "Field `pb1_select` reader - "]
pub type PB1_SELECT_R = crate::FieldReader<u8, PB1_SELECT_A>;
#[doc = "\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum PB1_SELECT_A {
#[doc = "0: `0`"]
INPUT = 0,
#[doc = "1: `1`"]
OUTPUT = 1,
#[doc = "2: `10`"]
PWM4 = 2,
#[doc = "3: `11`"]
I2_S2_DOUT3 = 3,
#[doc = "4: `100`"]
TWI2_SDA = 4,
#[doc = "5: `101`"]
I2_S2_DIN3 = 5,
#[doc = "6: `110`"]
UART0_RX = 6,
#[doc = "7: `111`"]
UART2_RX = 7,
#[doc = "8: `1000`"]
IR_RX = 8,
#[doc = "14: `1110`"]
PB_EINT1 = 14,
#[doc = "15: `1111`"]
IO_DISABLE = 15,
}
impl From<PB1_SELECT_A> for u8 {
#[inline(always)]
fn from(variant: PB1_SELECT_A) -> Self {
variant as _
}
}
impl PB1_SELECT_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> Option<PB1_SELECT_A> {
match self.bits {
0 => Some(PB1_SELECT_A::INPUT),
1 => Some(PB1_SELECT_A::OUTPUT),
2 => Some(PB1_SELECT_A::PWM4),
3 => Some(PB1_SELECT_A::I2_S2_DOUT3),
4 => Some(PB1_SELECT_A::TWI2_SDA),
5 => Some(PB1_SELECT_A::I2_S2_DIN3),
6 => Some(PB1_SELECT_A::UART0_RX),
7 => Some(PB1_SELECT_A::UART2_RX),
8 => Some(PB1_SELECT_A::IR_RX),
14 => Some(PB1_SELECT_A::PB_EINT1),
15 => Some(PB1_SELECT_A::IO_DISABLE),
_ => None,
}
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == PB1_SELECT_A::INPUT
}
#[doc = "Checks if the value of the field is `OUTPUT`"]
#[inline(always)]
pub fn is_output(&self) -> bool {
*self == PB1_SELECT_A::OUTPUT
}
#[doc = "Checks if the value of the field is `PWM4`"]
#[inline(always)]
pub fn is_pwm4(&self) -> bool {
*self == PB1_SELECT_A::PWM4
}
#[doc = "Checks if the value of the field is `I2_S2_DOUT3`"]
#[inline(always)]
pub fn is_i2_s2_dout3(&self) -> bool {
*self == PB1_SELECT_A::I2_S2_DOUT3
}
#[doc = "Checks if the value of the field is `TWI2_SDA`"]
#[inline(always)]
pub fn is_twi2_sda(&self) -> bool {
*self == PB1_SELECT_A::TWI2_SDA
}
#[doc = "Checks if the value of the field is `I2_S2_DIN3`"]
#[inline(always)]
pub fn is_i2_s2_din3(&self) -> bool {
*self == PB1_SELECT_A::I2_S2_DIN3
}
#[doc = "Checks if the value of the field is `UART0_RX`"]
#[inline(always)]
pub fn is_uart0_rx(&self) -> bool {
*self == PB1_SELECT_A::UART0_RX
}
#[doc = "Checks if the value of the field is `UART2_RX`"]
#[inline(always)]
pub fn is_uart2_rx(&self) -> bool {
*self == PB1_SELECT_A::UART2_RX
}
#[doc = "Checks if the value of the field is `IR_RX`"]
#[inline(always)]
pub fn is_ir_rx(&self) -> bool {
*self == PB1_SELECT_A::IR_RX
}
#[doc = "Checks if the value of the field is `PB_EINT1`"]
#[inline(always)]
pub fn is_pb_eint1(&self) -> bool {
*self == PB1_SELECT_A::PB_EINT1
}
#[doc = "Checks if the value of the field is `IO_DISABLE`"]
#[inline(always)]
pub fn is_io_disable(&self) -> bool {
*self == PB1_SELECT_A::IO_DISABLE
}
}
#[doc = "Field `pb1_select` writer - "]
pub type PB1_SELECT_W<'a, const O: u8> =
crate::FieldWriter<'a, u32, PB_CFG0_SPEC, u8, PB1_SELECT_A, 4, O>;
impl<'a, const O: u8> PB1_SELECT_W<'a, O> {
#[doc = "`0`"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(PB1_SELECT_A::INPUT)
}
#[doc = "`1`"]
#[inline(always)]
pub fn output(self) -> &'a mut W {
self.variant(PB1_SELECT_A::OUTPUT)
}
#[doc = "`10`"]
#[inline(always)]
pub fn pwm4(self) -> &'a mut W {
self.variant(PB1_SELECT_A::PWM4)
}
#[doc = "`11`"]
#[inline(always)]
pub fn i2_s2_dout3(self) -> &'a mut W {
self.variant(PB1_SELECT_A::I2_S2_DOUT3)
}
#[doc = "`100`"]
#[inline(always)]
pub fn twi2_sda(self) -> &'a mut W {
self.variant(PB1_SELECT_A::TWI2_SDA)
}
#[doc = "`101`"]
#[inline(always)]
pub fn i2_s2_din3(self) -> &'a mut W {
self.variant(PB1_SELECT_A::I2_S2_DIN3)
}
#[doc = "`110`"]
#[inline(always)]
pub fn uart0_rx(self) -> &'a mut W {
self.variant(PB1_SELECT_A::UART0_RX)
}
#[doc = "`111`"]
#[inline(always)]
pub fn uart2_rx(self) -> &'a mut W {
self.variant(PB1_SELECT_A::UART2_RX)
}
#[doc = "`1000`"]
#[inline(always)]
pub fn ir_rx(self) -> &'a mut W {
self.variant(PB1_SELECT_A::IR_RX)
}
#[doc = "`1110`"]
#[inline(always)]
pub fn pb_eint1(self) -> &'a mut W {
self.variant(PB1_SELECT_A::PB_EINT1)
}
#[doc = "`1111`"]
#[inline(always)]
pub fn io_disable(self) -> &'a mut W {
self.variant(PB1_SELECT_A::IO_DISABLE)
}
}
#[doc = "Field `pb2_select` reader - "]
pub type PB2_SELECT_R = crate::FieldReader<u8, PB2_SELECT_A>;
#[doc = "\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum PB2_SELECT_A {
#[doc = "0: `0`"]
INPUT = 0,
#[doc = "1: `1`"]
OUTPUT = 1,
#[doc = "2: `10`"]
LCD0_D0 = 2,
#[doc = "3: `11`"]
I2_S2_DOUT2 = 3,
#[doc = "4: `100`"]
TWI0_SDA = 4,
#[doc = "5: `101`"]
I2_S2_DIN2 = 5,
#[doc = "6: `110`"]
LCD0_D18 = 6,
#[doc = "7: `111`"]
UART4_TX = 7,
#[doc = "14: `1110`"]
PB_EINT2 = 14,
#[doc = "15: `1111`"]
IO_DISABLE = 15,
}
impl From<PB2_SELECT_A> for u8 {
#[inline(always)]
fn from(variant: PB2_SELECT_A) -> Self {
variant as _
}
}
impl PB2_SELECT_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> Option<PB2_SELECT_A> {
match self.bits {
0 => Some(PB2_SELECT_A::INPUT),
1 => Some(PB2_SELECT_A::OUTPUT),
2 => Some(PB2_SELECT_A::LCD0_D0),
3 => Some(PB2_SELECT_A::I2_S2_DOUT2),
4 => Some(PB2_SELECT_A::TWI0_SDA),
5 => Some(PB2_SELECT_A::I2_S2_DIN2),
6 => Some(PB2_SELECT_A::LCD0_D18),
7 => Some(PB2_SELECT_A::UART4_TX),
14 => Some(PB2_SELECT_A::PB_EINT2),
15 => Some(PB2_SELECT_A::IO_DISABLE),
_ => None,
}
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == PB2_SELECT_A::INPUT
}
#[doc = "Checks if the value of the field is `OUTPUT`"]
#[inline(always)]
pub fn is_output(&self) -> bool {
*self == PB2_SELECT_A::OUTPUT
}
#[doc = "Checks if the value of the field is `LCD0_D0`"]
#[inline(always)]
pub fn is_lcd0_d0(&self) -> bool {
*self == PB2_SELECT_A::LCD0_D0
}
#[doc = "Checks if the value of the field is `I2_S2_DOUT2`"]
#[inline(always)]
pub fn is_i2_s2_dout2(&self) -> bool {
*self == PB2_SELECT_A::I2_S2_DOUT2
}
#[doc = "Checks if the value of the field is `TWI0_SDA`"]
#[inline(always)]
pub fn is_twi0_sda(&self) -> bool {
*self == PB2_SELECT_A::TWI0_SDA
}
#[doc = "Checks if the value of the field is `I2_S2_DIN2`"]
#[inline(always)]
pub fn is_i2_s2_din2(&self) -> bool {
*self == PB2_SELECT_A::I2_S2_DIN2
}
#[doc = "Checks if the value of the field is `LCD0_D18`"]
#[inline(always)]
pub fn is_lcd0_d18(&self) -> bool {
*self == PB2_SELECT_A::LCD0_D18
}
#[doc = "Checks if the value of the field is `UART4_TX`"]
#[inline(always)]
pub fn is_uart4_tx(&self) -> bool {
*self == PB2_SELECT_A::UART4_TX
}
#[doc = "Checks if the value of the field is `PB_EINT2`"]
#[inline(always)]
pub fn is_pb_eint2(&self) -> bool {
*self == PB2_SELECT_A::PB_EINT2
}
#[doc = "Checks if the value of the field is `IO_DISABLE`"]
#[inline(always)]
pub fn is_io_disable(&self) -> bool {
*self == PB2_SELECT_A::IO_DISABLE
}
}
#[doc = "Field `pb2_select` writer - "]
pub type PB2_SELECT_W<'a, const O: u8> =
crate::FieldWriter<'a, u32, PB_CFG0_SPEC, u8, PB2_SELECT_A, 4, O>;
impl<'a, const O: u8> PB2_SELECT_W<'a, O> {
#[doc = "`0`"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(PB2_SELECT_A::INPUT)
}
#[doc = "`1`"]
#[inline(always)]
pub fn output(self) -> &'a mut W {
self.variant(PB2_SELECT_A::OUTPUT)
}
#[doc = "`10`"]
#[inline(always)]
pub fn lcd0_d0(self) -> &'a mut W {
self.variant(PB2_SELECT_A::LCD0_D0)
}
#[doc = "`11`"]
#[inline(always)]
pub fn i2_s2_dout2(self) -> &'a mut W {
self.variant(PB2_SELECT_A::I2_S2_DOUT2)
}
#[doc = "`100`"]
#[inline(always)]
pub fn twi0_sda(self) -> &'a mut W {
self.variant(PB2_SELECT_A::TWI0_SDA)
}
#[doc = "`101`"]
#[inline(always)]
pub fn i2_s2_din2(self) -> &'a mut W {
self.variant(PB2_SELECT_A::I2_S2_DIN2)
}
#[doc = "`110`"]
#[inline(always)]
pub fn lcd0_d18(self) -> &'a mut W {
self.variant(PB2_SELECT_A::LCD0_D18)
}
#[doc = "`111`"]
#[inline(always)]
pub fn uart4_tx(self) -> &'a mut W {
self.variant(PB2_SELECT_A::UART4_TX)
}
#[doc = "`1110`"]
#[inline(always)]
pub fn pb_eint2(self) -> &'a mut W {
self.variant(PB2_SELECT_A::PB_EINT2)
}
#[doc = "`1111`"]
#[inline(always)]
pub fn io_disable(self) -> &'a mut W {
self.variant(PB2_SELECT_A::IO_DISABLE)
}
}
#[doc = "Field `pb3_select` reader - "]
pub type PB3_SELECT_R = crate::FieldReader<u8, PB3_SELECT_A>;
#[doc = "\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum PB3_SELECT_A {
#[doc = "0: `0`"]
INPUT = 0,
#[doc = "1: `1`"]
OUTPUT = 1,
#[doc = "2: `10`"]
LCD0_D1 = 2,
#[doc = "3: `11`"]
I2_S2_DOUT1 = 3,
#[doc = "4: `100`"]
TWI0_SCK = 4,
#[doc = "5: `101`"]
I2_S2_DIN0 = 5,
#[doc = "6: `110`"]
LCD0_D19 = 6,
#[doc = "7: `111`"]
UART4_RX = 7,
#[doc = "14: `1110`"]
PB_EINT3 = 14,
#[doc = "15: `1111`"]
IO_DISABLE = 15,
}
impl From<PB3_SELECT_A> for u8 {
#[inline(always)]
fn from(variant: PB3_SELECT_A) -> Self {
variant as _
}
}
impl PB3_SELECT_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> Option<PB3_SELECT_A> {
match self.bits {
0 => Some(PB3_SELECT_A::INPUT),
1 => Some(PB3_SELECT_A::OUTPUT),
2 => Some(PB3_SELECT_A::LCD0_D1),
3 => Some(PB3_SELECT_A::I2_S2_DOUT1),
4 => Some(PB3_SELECT_A::TWI0_SCK),
5 => Some(PB3_SELECT_A::I2_S2_DIN0),
6 => Some(PB3_SELECT_A::LCD0_D19),
7 => Some(PB3_SELECT_A::UART4_RX),
14 => Some(PB3_SELECT_A::PB_EINT3),
15 => Some(PB3_SELECT_A::IO_DISABLE),
_ => None,
}
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == PB3_SELECT_A::INPUT
}
#[doc = "Checks if the value of the field is `OUTPUT`"]
#[inline(always)]
pub fn is_output(&self) -> bool {
*self == PB3_SELECT_A::OUTPUT
}
#[doc = "Checks if the value of the field is `LCD0_D1`"]
#[inline(always)]
pub fn is_lcd0_d1(&self) -> bool {
*self == PB3_SELECT_A::LCD0_D1
}
#[doc = "Checks if the value of the field is `I2_S2_DOUT1`"]
#[inline(always)]
pub fn is_i2_s2_dout1(&self) -> bool {
*self == PB3_SELECT_A::I2_S2_DOUT1
}
#[doc = "Checks if the value of the field is `TWI0_SCK`"]
#[inline(always)]
pub fn is_twi0_sck(&self) -> bool {
*self == PB3_SELECT_A::TWI0_SCK
}
#[doc = "Checks if the value of the field is `I2_S2_DIN0`"]
#[inline(always)]
pub fn is_i2_s2_din0(&self) -> bool {
*self == PB3_SELECT_A::I2_S2_DIN0
}
#[doc = "Checks if the value of the field is `LCD0_D19`"]
#[inline(always)]
pub fn is_lcd0_d19(&self) -> bool {
*self == PB3_SELECT_A::LCD0_D19
}
#[doc = "Checks if the value of the field is `UART4_RX`"]
#[inline(always)]
pub fn is_uart4_rx(&self) -> bool {
*self == PB3_SELECT_A::UART4_RX
}
#[doc = "Checks if the value of the field is `PB_EINT3`"]
#[inline(always)]
pub fn is_pb_eint3(&self) -> bool {
*self == PB3_SELECT_A::PB_EINT3
}
#[doc = "Checks if the value of the field is `IO_DISABLE`"]
#[inline(always)]
pub fn is_io_disable(&self) -> bool {
*self == PB3_SELECT_A::IO_DISABLE
}
}
#[doc = "Field `pb3_select` writer - "]
pub type PB3_SELECT_W<'a, const O: u8> =
crate::FieldWriter<'a, u32, PB_CFG0_SPEC, u8, PB3_SELECT_A, 4, O>;
impl<'a, const O: u8> PB3_SELECT_W<'a, O> {
#[doc = "`0`"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(PB3_SELECT_A::INPUT)
}
#[doc = "`1`"]
#[inline(always)]
pub fn output(self) -> &'a mut W {
self.variant(PB3_SELECT_A::OUTPUT)
}
#[doc = "`10`"]
#[inline(always)]
pub fn lcd0_d1(self) -> &'a mut W {
self.variant(PB3_SELECT_A::LCD0_D1)
}
#[doc = "`11`"]
#[inline(always)]
pub fn i2_s2_dout1(self) -> &'a mut W {
self.variant(PB3_SELECT_A::I2_S2_DOUT1)
}
#[doc = "`100`"]
#[inline(always)]
pub fn twi0_sck(self) -> &'a mut W {
self.variant(PB3_SELECT_A::TWI0_SCK)
}
#[doc = "`101`"]
#[inline(always)]
pub fn i2_s2_din0(self) -> &'a mut W {
self.variant(PB3_SELECT_A::I2_S2_DIN0)
}
#[doc = "`110`"]
#[inline(always)]
pub fn lcd0_d19(self) -> &'a mut W {
self.variant(PB3_SELECT_A::LCD0_D19)
}
#[doc = "`111`"]
#[inline(always)]
pub fn uart4_rx(self) -> &'a mut W {
self.variant(PB3_SELECT_A::UART4_RX)
}
#[doc = "`1110`"]
#[inline(always)]
pub fn pb_eint3(self) -> &'a mut W {
self.variant(PB3_SELECT_A::PB_EINT3)
}
#[doc = "`1111`"]
#[inline(always)]
pub fn io_disable(self) -> &'a mut W {
self.variant(PB3_SELECT_A::IO_DISABLE)
}
}
#[doc = "Field `pb4_select` reader - "]
pub type PB4_SELECT_R = crate::FieldReader<u8, PB4_SELECT_A>;
#[doc = "\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum PB4_SELECT_A {
#[doc = "0: `0`"]
INPUT = 0,
#[doc = "1: `1`"]
OUTPUT = 1,
#[doc = "2: `10`"]
LCD0_D8 = 2,
#[doc = "3: `11`"]
I2_S2_DOUT0 = 3,
#[doc = "4: `100`"]
TWI1_SCK = 4,
#[doc = "5: `101`"]
I2_S2_DIN1 = 5,
#[doc = "6: `110`"]
LCD0_D20 = 6,
#[doc = "7: `111`"]
UART5_TX = 7,
#[doc = "14: `1110`"]
PB_EINT4 = 14,
#[doc = "15: `1111`"]
IO_DISABLE = 15,
}
impl From<PB4_SELECT_A> for u8 {
#[inline(always)]
fn from(variant: PB4_SELECT_A) -> Self {
variant as _
}
}
impl PB4_SELECT_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> Option<PB4_SELECT_A> {
match self.bits {
0 => Some(PB4_SELECT_A::INPUT),
1 => Some(PB4_SELECT_A::OUTPUT),
2 => Some(PB4_SELECT_A::LCD0_D8),
3 => Some(PB4_SELECT_A::I2_S2_DOUT0),
4 => Some(PB4_SELECT_A::TWI1_SCK),
5 => Some(PB4_SELECT_A::I2_S2_DIN1),
6 => Some(PB4_SELECT_A::LCD0_D20),
7 => Some(PB4_SELECT_A::UART5_TX),
14 => Some(PB4_SELECT_A::PB_EINT4),
15 => Some(PB4_SELECT_A::IO_DISABLE),
_ => None,
}
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == PB4_SELECT_A::INPUT
}
#[doc = "Checks if the value of the field is `OUTPUT`"]
#[inline(always)]
pub fn is_output(&self) -> bool {
*self == PB4_SELECT_A::OUTPUT
}
#[doc = "Checks if the value of the field is `LCD0_D8`"]
#[inline(always)]
pub fn is_lcd0_d8(&self) -> bool {
*self == PB4_SELECT_A::LCD0_D8
}
#[doc = "Checks if the value of the field is `I2_S2_DOUT0`"]
#[inline(always)]
pub fn is_i2_s2_dout0(&self) -> bool {
*self == PB4_SELECT_A::I2_S2_DOUT0
}
#[doc = "Checks if the value of the field is `TWI1_SCK`"]
#[inline(always)]
pub fn is_twi1_sck(&self) -> bool {
*self == PB4_SELECT_A::TWI1_SCK
}
#[doc = "Checks if the value of the field is `I2_S2_DIN1`"]
#[inline(always)]
pub fn is_i2_s2_din1(&self) -> bool {
*self == PB4_SELECT_A::I2_S2_DIN1
}
#[doc = "Checks if the value of the field is `LCD0_D20`"]
#[inline(always)]
pub fn is_lcd0_d20(&self) -> bool {
*self == PB4_SELECT_A::LCD0_D20
}
#[doc = "Checks if the value of the field is `UART5_TX`"]
#[inline(always)]
pub fn is_uart5_tx(&self) -> bool {
*self == PB4_SELECT_A::UART5_TX
}
#[doc = "Checks if the value of the field is `PB_EINT4`"]
#[inline(always)]
pub fn is_pb_eint4(&self) -> bool {
*self == PB4_SELECT_A::PB_EINT4
}
#[doc = "Checks if the value of the field is `IO_DISABLE`"]
#[inline(always)]
pub fn is_io_disable(&self) -> bool {
*self == PB4_SELECT_A::IO_DISABLE
}
}
#[doc = "Field `pb4_select` writer - "]
pub type PB4_SELECT_W<'a, const O: u8> =
crate::FieldWriter<'a, u32, PB_CFG0_SPEC, u8, PB4_SELECT_A, 4, O>;
impl<'a, const O: u8> PB4_SELECT_W<'a, O> {
#[doc = "`0`"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(PB4_SELECT_A::INPUT)
}
#[doc = "`1`"]
#[inline(always)]
pub fn output(self) -> &'a mut W {
self.variant(PB4_SELECT_A::OUTPUT)
}
#[doc = "`10`"]
#[inline(always)]
pub fn lcd0_d8(self) -> &'a mut W {
self.variant(PB4_SELECT_A::LCD0_D8)
}
#[doc = "`11`"]
#[inline(always)]
pub fn i2_s2_dout0(self) -> &'a mut W {
self.variant(PB4_SELECT_A::I2_S2_DOUT0)
}
#[doc = "`100`"]
#[inline(always)]
pub fn twi1_sck(self) -> &'a mut W {
self.variant(PB4_SELECT_A::TWI1_SCK)
}
#[doc = "`101`"]
#[inline(always)]
pub fn i2_s2_din1(self) -> &'a mut W {
self.variant(PB4_SELECT_A::I2_S2_DIN1)
}
#[doc = "`110`"]
#[inline(always)]
pub fn lcd0_d20(self) -> &'a mut W {
self.variant(PB4_SELECT_A::LCD0_D20)
}
#[doc = "`111`"]
#[inline(always)]
pub fn uart5_tx(self) -> &'a mut W {
self.variant(PB4_SELECT_A::UART5_TX)
}
#[doc = "`1110`"]
#[inline(always)]
pub fn pb_eint4(self) -> &'a mut W {
self.variant(PB4_SELECT_A::PB_EINT4)
}
#[doc = "`1111`"]
#[inline(always)]
pub fn io_disable(self) -> &'a mut W {
self.variant(PB4_SELECT_A::IO_DISABLE)
}
}
#[doc = "Field `pb5_select` reader - "]
pub type PB5_SELECT_R = crate::FieldReader<u8, PB5_SELECT_A>;
#[doc = "\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum PB5_SELECT_A {
#[doc = "0: `0`"]
INPUT = 0,
#[doc = "1: `1`"]
OUTPUT = 1,
#[doc = "2: `10`"]
LCD0_D9 = 2,
#[doc = "3: `11`"]
I2_S2_BCLK = 3,
#[doc = "4: `100`"]
TWI1_SDA = 4,
#[doc = "5: `101`"]
PWM0 = 5,
#[doc = "6: `110`"]
LCD0_D21 = 6,
#[doc = "7: `111`"]
UART5_RX = 7,
#[doc = "14: `1110`"]
PB_EINT5 = 14,
#[doc = "15: `1111`"]
IO_DISABLE = 15,
}
impl From<PB5_SELECT_A> for u8 {
#[inline(always)]
fn from(variant: PB5_SELECT_A) -> Self {
variant as _
}
}
impl PB5_SELECT_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> Option<PB5_SELECT_A> {
match self.bits {
0 => Some(PB5_SELECT_A::INPUT),
1 => Some(PB5_SELECT_A::OUTPUT),
2 => Some(PB5_SELECT_A::LCD0_D9),
3 => Some(PB5_SELECT_A::I2_S2_BCLK),
4 => Some(PB5_SELECT_A::TWI1_SDA),
5 => Some(PB5_SELECT_A::PWM0),
6 => Some(PB5_SELECT_A::LCD0_D21),
7 => Some(PB5_SELECT_A::UART5_RX),
14 => Some(PB5_SELECT_A::PB_EINT5),
15 => Some(PB5_SELECT_A::IO_DISABLE),
_ => None,
}
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == PB5_SELECT_A::INPUT
}
#[doc = "Checks if the value of the field is `OUTPUT`"]
#[inline(always)]
pub fn is_output(&self) -> bool {
*self == PB5_SELECT_A::OUTPUT
}
#[doc = "Checks if the value of the field is `LCD0_D9`"]
#[inline(always)]
pub fn is_lcd0_d9(&self) -> bool {
*self == PB5_SELECT_A::LCD0_D9
}
#[doc = "Checks if the value of the field is `I2_S2_BCLK`"]
#[inline(always)]
pub fn is_i2_s2_bclk(&self) -> bool {
*self == PB5_SELECT_A::I2_S2_BCLK
}
#[doc = "Checks if the value of the field is `TWI1_SDA`"]
#[inline(always)]
pub fn is_twi1_sda(&self) -> bool {
*self == PB5_SELECT_A::TWI1_SDA
}
#[doc = "Checks if the value of the field is `PWM0`"]
#[inline(always)]
pub fn is_pwm0(&self) -> bool {
*self == PB5_SELECT_A::PWM0
}
#[doc = "Checks if the value of the field is `LCD0_D21`"]
#[inline(always)]
pub fn is_lcd0_d21(&self) -> bool {
*self == PB5_SELECT_A::LCD0_D21
}
#[doc = "Checks if the value of the field is `UART5_RX`"]
#[inline(always)]
pub fn is_uart5_rx(&self) -> bool {
*self == PB5_SELECT_A::UART5_RX
}
#[doc = "Checks if the value of the field is `PB_EINT5`"]
#[inline(always)]
pub fn is_pb_eint5(&self) -> bool {
*self == PB5_SELECT_A::PB_EINT5
}
#[doc = "Checks if the value of the field is `IO_DISABLE`"]
#[inline(always)]
pub fn is_io_disable(&self) -> bool {
*self == PB5_SELECT_A::IO_DISABLE
}
}
#[doc = "Field `pb5_select` writer - "]
pub type PB5_SELECT_W<'a, const O: u8> =
crate::FieldWriter<'a, u32, PB_CFG0_SPEC, u8, PB5_SELECT_A, 4, O>;
impl<'a, const O: u8> PB5_SELECT_W<'a, O> {
#[doc = "`0`"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(PB5_SELECT_A::INPUT)
}
#[doc = "`1`"]
#[inline(always)]
pub fn output(self) -> &'a mut W {
self.variant(PB5_SELECT_A::OUTPUT)
}
#[doc = "`10`"]
#[inline(always)]
pub fn lcd0_d9(self) -> &'a mut W {
self.variant(PB5_SELECT_A::LCD0_D9)
}
#[doc = "`11`"]
#[inline(always)]
pub fn i2_s2_bclk(self) -> &'a mut W {
self.variant(PB5_SELECT_A::I2_S2_BCLK)
}
#[doc = "`100`"]
#[inline(always)]
pub fn twi1_sda(self) -> &'a mut W {
self.variant(PB5_SELECT_A::TWI1_SDA)
}
#[doc = "`101`"]
#[inline(always)]
pub fn pwm0(self) -> &'a mut W {
self.variant(PB5_SELECT_A::PWM0)
}
#[doc = "`110`"]
#[inline(always)]
pub fn lcd0_d21(self) -> &'a mut W {
self.variant(PB5_SELECT_A::LCD0_D21)
}
#[doc = "`111`"]
#[inline(always)]
pub fn uart5_rx(self) -> &'a mut W {
self.variant(PB5_SELECT_A::UART5_RX)
}
#[doc = "`1110`"]
#[inline(always)]
pub fn pb_eint5(self) -> &'a mut W {
self.variant(PB5_SELECT_A::PB_EINT5)
}
#[doc = "`1111`"]
#[inline(always)]
pub fn io_disable(self) -> &'a mut W {
self.variant(PB5_SELECT_A::IO_DISABLE)
}
}
#[doc = "Field `pb6_select` reader - "]
pub type PB6_SELECT_R = crate::FieldReader<u8, PB6_SELECT_A>;
#[doc = "\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum PB6_SELECT_A {
#[doc = "0: `0`"]
INPUT = 0,
#[doc = "1: `1`"]
OUTPUT = 1,
#[doc = "2: `10`"]
LCD0_D16 = 2,
#[doc = "3: `11`"]
I2_S2_LRCK = 3,
#[doc = "4: `100`"]
TWI3_SCK = 4,
#[doc = "5: `101`"]
PWM1 = 5,
#[doc = "6: `110`"]
LCD0_D22 = 6,
#[doc = "7: `111`"]
UART3_TX = 7,
#[doc = "8: `1000`"]
CPUBIST0 = 8,
#[doc = "14: `1110`"]
PB_EINT6 = 14,
#[doc = "15: `1111`"]
IO_DISABLE = 15,
}
impl From<PB6_SELECT_A> for u8 {
#[inline(always)]
fn from(variant: PB6_SELECT_A) -> Self {
variant as _
}
}
impl PB6_SELECT_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> Option<PB6_SELECT_A> {
match self.bits {
0 => Some(PB6_SELECT_A::INPUT),
1 => Some(PB6_SELECT_A::OUTPUT),
2 => Some(PB6_SELECT_A::LCD0_D16),
3 => Some(PB6_SELECT_A::I2_S2_LRCK),
4 => Some(PB6_SELECT_A::TWI3_SCK),
5 => Some(PB6_SELECT_A::PWM1),
6 => Some(PB6_SELECT_A::LCD0_D22),
7 => Some(PB6_SELECT_A::UART3_TX),
8 => Some(PB6_SELECT_A::CPUBIST0),
14 => Some(PB6_SELECT_A::PB_EINT6),
15 => Some(PB6_SELECT_A::IO_DISABLE),
_ => None,
}
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == PB6_SELECT_A::INPUT
}
#[doc = "Checks if the value of the field is `OUTPUT`"]
#[inline(always)]
pub fn is_output(&self) -> bool {
*self == PB6_SELECT_A::OUTPUT
}
#[doc = "Checks if the value of the field is `LCD0_D16`"]
#[inline(always)]
pub fn is_lcd0_d16(&self) -> bool {
*self == PB6_SELECT_A::LCD0_D16
}
#[doc = "Checks if the value of the field is `I2_S2_LRCK`"]
#[inline(always)]
pub fn is_i2_s2_lrck(&self) -> bool {
*self == PB6_SELECT_A::I2_S2_LRCK
}
#[doc = "Checks if the value of the field is `TWI3_SCK`"]
#[inline(always)]
pub fn is_twi3_sck(&self) -> bool {
*self == PB6_SELECT_A::TWI3_SCK
}
#[doc = "Checks if the value of the field is `PWM1`"]
#[inline(always)]
pub fn is_pwm1(&self) -> bool {
*self == PB6_SELECT_A::PWM1
}
#[doc = "Checks if the value of the field is `LCD0_D22`"]
#[inline(always)]
pub fn is_lcd0_d22(&self) -> bool {
*self == PB6_SELECT_A::LCD0_D22
}
#[doc = "Checks if the value of the field is `UART3_TX`"]
#[inline(always)]
pub fn is_uart3_tx(&self) -> bool {
*self == PB6_SELECT_A::UART3_TX
}
#[doc = "Checks if the value of the field is `CPUBIST0`"]
#[inline(always)]
pub fn is_cpubist0(&self) -> bool {
*self == PB6_SELECT_A::CPUBIST0
}
#[doc = "Checks if the value of the field is `PB_EINT6`"]
#[inline(always)]
pub fn is_pb_eint6(&self) -> bool {
*self == PB6_SELECT_A::PB_EINT6
}
#[doc = "Checks if the value of the field is `IO_DISABLE`"]
#[inline(always)]
pub fn is_io_disable(&self) -> bool {
*self == PB6_SELECT_A::IO_DISABLE
}
}
#[doc = "Field `pb6_select` writer - "]
pub type PB6_SELECT_W<'a, const O: u8> =
crate::FieldWriter<'a, u32, PB_CFG0_SPEC, u8, PB6_SELECT_A, 4, O>;
impl<'a, const O: u8> PB6_SELECT_W<'a, O> {
#[doc = "`0`"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(PB6_SELECT_A::INPUT)
}
#[doc = "`1`"]
#[inline(always)]
pub fn output(self) -> &'a mut W {
self.variant(PB6_SELECT_A::OUTPUT)
}
#[doc = "`10`"]
#[inline(always)]
pub fn lcd0_d16(self) -> &'a mut W {
self.variant(PB6_SELECT_A::LCD0_D16)
}
#[doc = "`11`"]
#[inline(always)]
pub fn i2_s2_lrck(self) -> &'a mut W {
self.variant(PB6_SELECT_A::I2_S2_LRCK)
}
#[doc = "`100`"]
#[inline(always)]
pub fn twi3_sck(self) -> &'a mut W {
self.variant(PB6_SELECT_A::TWI3_SCK)
}
#[doc = "`101`"]
#[inline(always)]
pub fn pwm1(self) -> &'a mut W {
self.variant(PB6_SELECT_A::PWM1)
}
#[doc = "`110`"]
#[inline(always)]
pub fn lcd0_d22(self) -> &'a mut W {
self.variant(PB6_SELECT_A::LCD0_D22)
}
#[doc = "`111`"]
#[inline(always)]
pub fn uart3_tx(self) -> &'a mut W {
self.variant(PB6_SELECT_A::UART3_TX)
}
#[doc = "`1000`"]
#[inline(always)]
pub fn cpubist0(self) -> &'a mut W {
self.variant(PB6_SELECT_A::CPUBIST0)
}
#[doc = "`1110`"]
#[inline(always)]
pub fn pb_eint6(self) -> &'a mut W {
self.variant(PB6_SELECT_A::PB_EINT6)
}
#[doc = "`1111`"]
#[inline(always)]
pub fn io_disable(self) -> &'a mut W {
self.variant(PB6_SELECT_A::IO_DISABLE)
}
}
#[doc = "Field `pb7_select` reader - "]
pub type PB7_SELECT_R = crate::FieldReader<u8, PB7_SELECT_A>;
#[doc = "\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum PB7_SELECT_A {
#[doc = "0: `0`"]
INPUT = 0,
#[doc = "1: `1`"]
OUTPUT = 1,
#[doc = "2: `10`"]
LCD0_D17 = 2,
#[doc = "3: `11`"]
I2_S2_MCLK = 3,
#[doc = "4: `100`"]
TWI3_SDA = 4,
#[doc = "5: `101`"]
IR_RX = 5,
#[doc = "6: `110`"]
LCD0_D23 = 6,
#[doc = "7: `111`"]
UART3_RX = 7,
#[doc = "8: `1000`"]
CPUBIST1 = 8,
#[doc = "14: `1110`"]
PB_EINT7 = 14,
#[doc = "15: `1111`"]
IO_DISABLE = 15,
}
impl From<PB7_SELECT_A> for u8 {
#[inline(always)]
fn from(variant: PB7_SELECT_A) -> Self {
variant as _
}
}
impl PB7_SELECT_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> Option<PB7_SELECT_A> {
match self.bits {
0 => Some(PB7_SELECT_A::INPUT),
1 => Some(PB7_SELECT_A::OUTPUT),
2 => Some(PB7_SELECT_A::LCD0_D17),
3 => Some(PB7_SELECT_A::I2_S2_MCLK),
4 => Some(PB7_SELECT_A::TWI3_SDA),
5 => Some(PB7_SELECT_A::IR_RX),
6 => Some(PB7_SELECT_A::LCD0_D23),
7 => Some(PB7_SELECT_A::UART3_RX),
8 => Some(PB7_SELECT_A::CPUBIST1),
14 => Some(PB7_SELECT_A::PB_EINT7),
15 => Some(PB7_SELECT_A::IO_DISABLE),
_ => None,
}
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == PB7_SELECT_A::INPUT
}
#[doc = "Checks if the value of the field is `OUTPUT`"]
#[inline(always)]
pub fn is_output(&self) -> bool {
*self == PB7_SELECT_A::OUTPUT
}
#[doc = "Checks if the value of the field is `LCD0_D17`"]
#[inline(always)]
pub fn is_lcd0_d17(&self) -> bool {
*self == PB7_SELECT_A::LCD0_D17
}
#[doc = "Checks if the value of the field is `I2_S2_MCLK`"]
#[inline(always)]
pub fn is_i2_s2_mclk(&self) -> bool {
*self == PB7_SELECT_A::I2_S2_MCLK
}
#[doc = "Checks if the value of the field is `TWI3_SDA`"]
#[inline(always)]
pub fn is_twi3_sda(&self) -> bool {
*self == PB7_SELECT_A::TWI3_SDA
}
#[doc = "Checks if the value of the field is `IR_RX`"]
#[inline(always)]
pub fn is_ir_rx(&self) -> bool {
*self == PB7_SELECT_A::IR_RX
}
#[doc = "Checks if the value of the field is `LCD0_D23`"]
#[inline(always)]
pub fn is_lcd0_d23(&self) -> bool {
*self == PB7_SELECT_A::LCD0_D23
}
#[doc = "Checks if the value of the field is `UART3_RX`"]
#[inline(always)]
pub fn is_uart3_rx(&self) -> bool {
*self == PB7_SELECT_A::UART3_RX
}
#[doc = "Checks if the value of the field is `CPUBIST1`"]
#[inline(always)]
pub fn is_cpubist1(&self) -> bool {
*self == PB7_SELECT_A::CPUBIST1
}
#[doc = "Checks if the value of the field is `PB_EINT7`"]
#[inline(always)]
pub fn is_pb_eint7(&self) -> bool {
*self == PB7_SELECT_A::PB_EINT7
}
#[doc = "Checks if the value of the field is `IO_DISABLE`"]
#[inline(always)]
pub fn is_io_disable(&self) -> bool {
*self == PB7_SELECT_A::IO_DISABLE
}
}
#[doc = "Field `pb7_select` writer - "]
pub type PB7_SELECT_W<'a, const O: u8> =
crate::FieldWriter<'a, u32, PB_CFG0_SPEC, u8, PB7_SELECT_A, 4, O>;
impl<'a, const O: u8> PB7_SELECT_W<'a, O> {
#[doc = "`0`"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(PB7_SELECT_A::INPUT)
}
#[doc = "`1`"]
#[inline(always)]
pub fn output(self) -> &'a mut W {
self.variant(PB7_SELECT_A::OUTPUT)
}
#[doc = "`10`"]
#[inline(always)]
pub fn lcd0_d17(self) -> &'a mut W {
self.variant(PB7_SELECT_A::LCD0_D17)
}
#[doc = "`11`"]
#[inline(always)]
pub fn i2_s2_mclk(self) -> &'a mut W {
self.variant(PB7_SELECT_A::I2_S2_MCLK)
}
#[doc = "`100`"]
#[inline(always)]
pub fn twi3_sda(self) -> &'a mut W {
self.variant(PB7_SELECT_A::TWI3_SDA)
}
#[doc = "`101`"]
#[inline(always)]
pub fn ir_rx(self) -> &'a mut W {
self.variant(PB7_SELECT_A::IR_RX)
}
#[doc = "`110`"]
#[inline(always)]
pub fn lcd0_d23(self) -> &'a mut W {
self.variant(PB7_SELECT_A::LCD0_D23)
}
#[doc = "`111`"]
#[inline(always)]
pub fn uart3_rx(self) -> &'a mut W {
self.variant(PB7_SELECT_A::UART3_RX)
}
#[doc = "`1000`"]
#[inline(always)]
pub fn cpubist1(self) -> &'a mut W {
self.variant(PB7_SELECT_A::CPUBIST1)
}
#[doc = "`1110`"]
#[inline(always)]
pub fn pb_eint7(self) -> &'a mut W {
self.variant(PB7_SELECT_A::PB_EINT7)
}
#[doc = "`1111`"]
#[inline(always)]
pub fn io_disable(self) -> &'a mut W {
self.variant(PB7_SELECT_A::IO_DISABLE)
}
}
impl R {
#[doc = "Bits 0:3"]
#[inline(always)]
pub fn pb0_select(&self) -> PB0_SELECT_R {
PB0_SELECT_R::new((self.bits & 0x0f) as u8)
}
#[doc = "Bits 4:7"]
#[inline(always)]
pub fn pb1_select(&self) -> PB1_SELECT_R {
PB1_SELECT_R::new(((self.bits >> 4) & 0x0f) as u8)
}
#[doc = "Bits 8:11"]
#[inline(always)]
pub fn pb2_select(&self) -> PB2_SELECT_R {
PB2_SELECT_R::new(((self.bits >> 8) & 0x0f) as u8)
}
#[doc = "Bits 12:15"]
#[inline(always)]
pub fn pb3_select(&self) -> PB3_SELECT_R {
PB3_SELECT_R::new(((self.bits >> 12) & 0x0f) as u8)
}
#[doc = "Bits 16:19"]
#[inline(always)]
pub fn pb4_select(&self) -> PB4_SELECT_R {
PB4_SELECT_R::new(((self.bits >> 16) & 0x0f) as u8)
}
#[doc = "Bits 20:23"]
#[inline(always)]
pub fn pb5_select(&self) -> PB5_SELECT_R {
PB5_SELECT_R::new(((self.bits >> 20) & 0x0f) as u8)
}
#[doc = "Bits 24:27"]
#[inline(always)]
pub fn pb6_select(&self) -> PB6_SELECT_R {
PB6_SELECT_R::new(((self.bits >> 24) & 0x0f) as u8)
}
#[doc = "Bits 28:31"]
#[inline(always)]
pub fn pb7_select(&self) -> PB7_SELECT_R {
PB7_SELECT_R::new(((self.bits >> 28) & 0x0f) as u8)
}
}
impl W {
#[doc = "Bits 0:3"]
#[inline(always)]
#[must_use]
pub fn pb0_select(&mut self) -> PB0_SELECT_W<0> {
PB0_SELECT_W::new(self)
}
#[doc = "Bits 4:7"]
#[inline(always)]
#[must_use]
pub fn pb1_select(&mut self) -> PB1_SELECT_W<4> {
PB1_SELECT_W::new(self)
}
#[doc = "Bits 8:11"]
#[inline(always)]
#[must_use]
pub fn pb2_select(&mut self) -> PB2_SELECT_W<8> {
PB2_SELECT_W::new(self)
}
#[doc = "Bits 12:15"]
#[inline(always)]
#[must_use]
pub fn pb3_select(&mut self) -> PB3_SELECT_W<12> {
PB3_SELECT_W::new(self)
}
#[doc = "Bits 16:19"]
#[inline(always)]
#[must_use]
pub fn pb4_select(&mut self) -> PB4_SELECT_W<16> {
PB4_SELECT_W::new(self)
}
#[doc = "Bits 20:23"]
#[inline(always)]
#[must_use]
pub fn pb5_select(&mut self) -> PB5_SELECT_W<20> {
PB5_SELECT_W::new(self)
}
#[doc = "Bits 24:27"]
#[inline(always)]
#[must_use]
pub fn pb6_select(&mut self) -> PB6_SELECT_W<24> {
PB6_SELECT_W::new(self)
}
#[doc = "Bits 28:31"]
#[inline(always)]
#[must_use]
pub fn pb7_select(&mut self) -> PB7_SELECT_W<28> {
PB7_SELECT_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "PB Configure Register 0\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [pb_cfg0](index.html) module"]
pub struct PB_CFG0_SPEC;
impl crate::RegisterSpec for PB_CFG0_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [pb_cfg0::R](R) reader structure"]
impl crate::Readable for PB_CFG0_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [pb_cfg0::W](W) writer structure"]
impl crate::Writable for PB_CFG0_SPEC {
type Writer = W;
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets pb_cfg0 to value 0"]
impl crate::Resettable for PB_CFG0_SPEC {
const RESET_VALUE: Self::Ux = 0;
}