#[doc = "Register `pd_pull0` reader"]
pub struct R(crate::R<PD_PULL0_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<PD_PULL0_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<PD_PULL0_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<PD_PULL0_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `pd_pull0` writer"]
pub struct W(crate::W<PD_PULL0_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<PD_PULL0_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<PD_PULL0_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<PD_PULL0_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `pd_pull[0-15]` reader - PD Pull_up/down Select"]
pub type PD_PULL_R = crate::FieldReader<u8, PD_PULL_A>;
#[doc = "PD Pull_up/down Select\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum PD_PULL_A {
#[doc = "0: `0`"]
PULL_DISABLE = 0,
#[doc = "1: `1`"]
PULL_UP = 1,
#[doc = "2: `10`"]
PULL_DOWN = 2,
}
impl From<PD_PULL_A> for u8 {
#[inline(always)]
fn from(variant: PD_PULL_A) -> Self {
variant as _
}
}
impl PD_PULL_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> PD_PULL_A {
match self.bits {
0 => PD_PULL_A::PULL_DISABLE,
1 => PD_PULL_A::PULL_UP,
2 => PD_PULL_A::PULL_DOWN,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `PULL_DISABLE`"]
#[inline(always)]
pub fn is_pull_disable(&self) -> bool {
*self == PD_PULL_A::PULL_DISABLE
}
#[doc = "Checks if the value of the field is `PULL_UP`"]
#[inline(always)]
pub fn is_pull_up(&self) -> bool {
*self == PD_PULL_A::PULL_UP
}
#[doc = "Checks if the value of the field is `PULL_DOWN`"]
#[inline(always)]
pub fn is_pull_down(&self) -> bool {
*self == PD_PULL_A::PULL_DOWN
}
}
#[doc = "Field `pd_pull[0-15]` writer - PD Pull_up/down Select"]
pub type PD_PULL_W<'a, const O: u8> =
crate::FieldWriter<'a, u32, PD_PULL0_SPEC, u8, PD_PULL_A, 2, O>;
impl<'a, const O: u8> PD_PULL_W<'a, O> {
#[doc = "`0`"]
#[inline(always)]
pub fn pull_disable(self) -> &'a mut W {
self.variant(PD_PULL_A::PULL_DISABLE)
}
#[doc = "`1`"]
#[inline(always)]
pub fn pull_up(self) -> &'a mut W {
self.variant(PD_PULL_A::PULL_UP)
}
#[doc = "`10`"]
#[inline(always)]
pub fn pull_down(self) -> &'a mut W {
self.variant(PD_PULL_A::PULL_DOWN)
}
}
impl R {
#[doc = "PD Pull_up/down Select"]
#[inline(always)]
pub unsafe fn pd_pull(&self, n: u8) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> (n * 2)) & 3) as u8)
}
#[doc = "Bits 0:1 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd0_pull(&self) -> PD_PULL_R {
PD_PULL_R::new((self.bits & 3) as u8)
}
#[doc = "Bits 2:3 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd1_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 2) & 3) as u8)
}
#[doc = "Bits 4:5 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd2_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 4) & 3) as u8)
}
#[doc = "Bits 6:7 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd3_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 6) & 3) as u8)
}
#[doc = "Bits 8:9 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd4_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 8) & 3) as u8)
}
#[doc = "Bits 10:11 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd5_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 10) & 3) as u8)
}
#[doc = "Bits 12:13 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd6_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 12) & 3) as u8)
}
#[doc = "Bits 14:15 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd7_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 14) & 3) as u8)
}
#[doc = "Bits 16:17 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd8_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 16) & 3) as u8)
}
#[doc = "Bits 18:19 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd9_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 18) & 3) as u8)
}
#[doc = "Bits 20:21 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd10_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 20) & 3) as u8)
}
#[doc = "Bits 22:23 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd11_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 22) & 3) as u8)
}
#[doc = "Bits 24:25 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd12_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 24) & 3) as u8)
}
#[doc = "Bits 26:27 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd13_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 26) & 3) as u8)
}
#[doc = "Bits 28:29 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd14_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 28) & 3) as u8)
}
#[doc = "Bits 30:31 - PD Pull_up/down Select"]
#[inline(always)]
pub fn pd15_pull(&self) -> PD_PULL_R {
PD_PULL_R::new(((self.bits >> 30) & 3) as u8)
}
}
impl W {
#[doc = "PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub unsafe fn pd_pull<const O: u8>(&mut self) -> PD_PULL_W<O> {
PD_PULL_W::new(self)
}
#[doc = "Bits 0:1 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd0_pull(&mut self) -> PD_PULL_W<0> {
PD_PULL_W::new(self)
}
#[doc = "Bits 2:3 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd1_pull(&mut self) -> PD_PULL_W<2> {
PD_PULL_W::new(self)
}
#[doc = "Bits 4:5 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd2_pull(&mut self) -> PD_PULL_W<4> {
PD_PULL_W::new(self)
}
#[doc = "Bits 6:7 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd3_pull(&mut self) -> PD_PULL_W<6> {
PD_PULL_W::new(self)
}
#[doc = "Bits 8:9 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd4_pull(&mut self) -> PD_PULL_W<8> {
PD_PULL_W::new(self)
}
#[doc = "Bits 10:11 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd5_pull(&mut self) -> PD_PULL_W<10> {
PD_PULL_W::new(self)
}
#[doc = "Bits 12:13 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd6_pull(&mut self) -> PD_PULL_W<12> {
PD_PULL_W::new(self)
}
#[doc = "Bits 14:15 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd7_pull(&mut self) -> PD_PULL_W<14> {
PD_PULL_W::new(self)
}
#[doc = "Bits 16:17 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd8_pull(&mut self) -> PD_PULL_W<16> {
PD_PULL_W::new(self)
}
#[doc = "Bits 18:19 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd9_pull(&mut self) -> PD_PULL_W<18> {
PD_PULL_W::new(self)
}
#[doc = "Bits 20:21 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd10_pull(&mut self) -> PD_PULL_W<20> {
PD_PULL_W::new(self)
}
#[doc = "Bits 22:23 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd11_pull(&mut self) -> PD_PULL_W<22> {
PD_PULL_W::new(self)
}
#[doc = "Bits 24:25 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd12_pull(&mut self) -> PD_PULL_W<24> {
PD_PULL_W::new(self)
}
#[doc = "Bits 26:27 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd13_pull(&mut self) -> PD_PULL_W<26> {
PD_PULL_W::new(self)
}
#[doc = "Bits 28:29 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd14_pull(&mut self) -> PD_PULL_W<28> {
PD_PULL_W::new(self)
}
#[doc = "Bits 30:31 - PD Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pd15_pull(&mut self) -> PD_PULL_W<30> {
PD_PULL_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "PD Pull Register 0\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [pd_pull0](index.html) module"]
pub struct PD_PULL0_SPEC;
impl crate::RegisterSpec for PD_PULL0_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [pd_pull0::R](R) reader structure"]
impl crate::Readable for PD_PULL0_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [pd_pull0::W](W) writer structure"]
impl crate::Writable for PD_PULL0_SPEC {
type Writer = W;
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets pd_pull0 to value 0"]
impl crate::Resettable for PD_PULL0_SPEC {
const RESET_VALUE: Self::Ux = 0;
}