#[doc = "Register `pg_pull1` reader"]
pub struct R(crate::R<PG_PULL1_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<PG_PULL1_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<PG_PULL1_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<PG_PULL1_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `pg_pull1` writer"]
pub struct W(crate::W<PG_PULL1_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<PG_PULL1_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<PG_PULL1_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<PG_PULL1_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `pg_pull[16-18]` reader - PG Pull_up/down Select"]
pub type PG_PULL_R = crate::FieldReader<u8, PG_PULL_A>;
#[doc = "PG Pull_up/down Select\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum PG_PULL_A {
#[doc = "0: `0`"]
PULL_DISABLE = 0,
#[doc = "1: `1`"]
PULL_UP = 1,
#[doc = "2: `10`"]
PULL_DOWN = 2,
}
impl From<PG_PULL_A> for u8 {
#[inline(always)]
fn from(variant: PG_PULL_A) -> Self {
variant as _
}
}
impl PG_PULL_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> PG_PULL_A {
match self.bits {
0 => PG_PULL_A::PULL_DISABLE,
1 => PG_PULL_A::PULL_UP,
2 => PG_PULL_A::PULL_DOWN,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `PULL_DISABLE`"]
#[inline(always)]
pub fn is_pull_disable(&self) -> bool {
*self == PG_PULL_A::PULL_DISABLE
}
#[doc = "Checks if the value of the field is `PULL_UP`"]
#[inline(always)]
pub fn is_pull_up(&self) -> bool {
*self == PG_PULL_A::PULL_UP
}
#[doc = "Checks if the value of the field is `PULL_DOWN`"]
#[inline(always)]
pub fn is_pull_down(&self) -> bool {
*self == PG_PULL_A::PULL_DOWN
}
}
#[doc = "Field `pg_pull[16-18]` writer - PG Pull_up/down Select"]
pub type PG_PULL_W<'a, const O: u8> =
crate::FieldWriter<'a, u32, PG_PULL1_SPEC, u8, PG_PULL_A, 2, O>;
impl<'a, const O: u8> PG_PULL_W<'a, O> {
#[doc = "`0`"]
#[inline(always)]
pub fn pull_disable(self) -> &'a mut W {
self.variant(PG_PULL_A::PULL_DISABLE)
}
#[doc = "`1`"]
#[inline(always)]
pub fn pull_up(self) -> &'a mut W {
self.variant(PG_PULL_A::PULL_UP)
}
#[doc = "`10`"]
#[inline(always)]
pub fn pull_down(self) -> &'a mut W {
self.variant(PG_PULL_A::PULL_DOWN)
}
}
impl R {
#[doc = "PG Pull_up/down Select"]
#[inline(always)]
pub unsafe fn pg_pull(&self, n: u8) -> PG_PULL_R {
PG_PULL_R::new(((self.bits >> ((n - 16) * 2)) & 3) as u8)
}
#[doc = "Bits 0:1 - PG Pull_up/down Select"]
#[inline(always)]
pub fn pg16_pull(&self) -> PG_PULL_R {
PG_PULL_R::new((self.bits & 3) as u8)
}
#[doc = "Bits 2:3 - PG Pull_up/down Select"]
#[inline(always)]
pub fn pg17_pull(&self) -> PG_PULL_R {
PG_PULL_R::new(((self.bits >> 2) & 3) as u8)
}
#[doc = "Bits 4:5 - PG Pull_up/down Select"]
#[inline(always)]
pub fn pg18_pull(&self) -> PG_PULL_R {
PG_PULL_R::new(((self.bits >> 4) & 3) as u8)
}
}
impl W {
#[doc = "PG Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub unsafe fn pg_pull<const O: u8>(&mut self) -> PG_PULL_W<O> {
PG_PULL_W::new(self)
}
#[doc = "Bits 0:1 - PG Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pg16_pull(&mut self) -> PG_PULL_W<0> {
PG_PULL_W::new(self)
}
#[doc = "Bits 2:3 - PG Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pg17_pull(&mut self) -> PG_PULL_W<2> {
PG_PULL_W::new(self)
}
#[doc = "Bits 4:5 - PG Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pg18_pull(&mut self) -> PG_PULL_W<4> {
PG_PULL_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "PG Pull Register 1\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [pg_pull1](index.html) module"]
pub struct PG_PULL1_SPEC;
impl crate::RegisterSpec for PG_PULL1_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [pg_pull1::R](R) reader structure"]
impl crate::Readable for PG_PULL1_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [pg_pull1::W](W) writer structure"]
impl crate::Writable for PG_PULL1_SPEC {
type Writer = W;
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets pg_pull1 to value 0"]
impl crate::Resettable for PG_PULL1_SPEC {
const RESET_VALUE: Self::Ux = 0;
}