1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
//! SPI master mode traits.

use core::fmt::Debug;

use embedded_hal::digital::OutputPin;
use embedded_hal::spi as blocking;
pub use embedded_hal::spi::{
    Error, ErrorKind, ErrorType, Mode, Operation, Phase, Polarity, MODE_0, MODE_1, MODE_2, MODE_3,
};

use crate::delay::DelayUs;

/// SPI device trait
///
/// `SpiDevice` represents ownership over a single SPI device on a (possibly shared) bus, selected
/// with a CS (Chip Select) pin.
///
/// See (the docs on embedded-hal)[embedded_hal::spi] for important information on SPI Bus vs Device traits.
pub trait SpiDevice<Word: Copy + 'static = u8>: ErrorType {
    /// Perform a transaction against the device.
    ///
    /// - Locks the bus
    /// - Asserts the CS (Chip Select) pin.
    /// - Performs all the operations.
    /// - [Flushes](SpiBus::flush) the bus.
    /// - Deasserts the CS pin.
    /// - Unlocks the bus.
    ///
    /// The locking mechanism is implementation-defined. The only requirement is it must prevent two
    /// transactions from executing concurrently against the same bus. Examples of implementations are:
    /// critical sections, blocking mutexes, returning an error or panicking if the bus is already busy.
    ///
    /// On bus errors the implementation should try to deassert CS.
    /// If an error occurs while deasserting CS the bus error should take priority as the return value.
    async fn transaction(
        &mut self,
        operations: &mut [Operation<'_, Word>],
    ) -> Result<(), Self::Error>;

    /// Do a read within a transaction.
    ///
    /// This is a convenience method equivalent to `device.read_transaction(&mut [buf])`.
    ///
    /// See also: [`SpiDevice::transaction`], [`SpiDevice::read`]
    async fn read(&mut self, buf: &mut [Word]) -> Result<(), Self::Error> {
        self.transaction(&mut [Operation::Read(buf)]).await
    }

    /// Do a write within a transaction.
    ///
    /// This is a convenience method equivalent to `device.write_transaction(&mut [buf])`.
    ///
    /// See also: [`SpiDevice::transaction`], [`SpiDevice::write`]
    async fn write(&mut self, buf: &[Word]) -> Result<(), Self::Error> {
        self.transaction(&mut [Operation::Write(buf)]).await
    }

    /// Do a transfer within a transaction.
    ///
    /// This is a convenience method equivalent to `device.transaction(|bus| bus.transfer(read, write))`.
    ///
    /// See also: [`SpiDevice::transaction`], [`SpiBus::transfer`]
    async fn transfer(&mut self, read: &mut [Word], write: &[Word]) -> Result<(), Self::Error> {
        self.transaction(&mut [Operation::Transfer(read, write)])
            .await
    }

    /// Do an in-place transfer within a transaction.
    ///
    /// This is a convenience method equivalent to `device.transaction(|bus| bus.transfer_in_place(buf))`.
    ///
    /// See also: [`SpiDevice::transaction`], [`SpiBus::transfer_in_place`]
    async fn transfer_in_place(&mut self, buf: &mut [Word]) -> Result<(), Self::Error> {
        self.transaction(&mut [Operation::TransferInPlace(buf)])
            .await
    }
}

impl<Word: Copy + 'static, T: SpiDevice<Word>> SpiDevice<Word> for &mut T {
    async fn transaction(
        &mut self,
        operations: &mut [Operation<'_, Word>],
    ) -> Result<(), Self::Error> {
        T::transaction(self, operations).await
    }

    async fn read(&mut self, buf: &mut [Word]) -> Result<(), Self::Error> {
        T::read(self, buf).await
    }

    async fn write(&mut self, buf: &[Word]) -> Result<(), Self::Error> {
        T::write(self, buf).await
    }

    async fn transfer(&mut self, read: &mut [Word], write: &[Word]) -> Result<(), Self::Error> {
        T::transfer(self, read, write).await
    }

    async fn transfer_in_place(&mut self, buf: &mut [Word]) -> Result<(), Self::Error> {
        T::transfer_in_place(self, buf).await
    }
}

/// SPI bus
///
/// `SpiBus` represents **exclusive ownership** over the whole SPI bus, with SCK, MOSI and MISO pins.
///
/// See (the docs on embedded-hal)[embedded_hal::spi] for important information on SPI Bus vs Device traits.
pub trait SpiBus<Word: 'static + Copy = u8>: ErrorType {
    /// Read `words` from the slave.
    ///
    /// The word value sent on MOSI during reading is implementation-defined,
    /// typically `0x00`, `0xFF`, or configurable.
    ///
    /// Implementations are allowed to return before the operation is
    /// complete. See (the docs on embedded-hal)[embedded_hal::spi] for details on flushing.
    async fn read(&mut self, words: &mut [Word]) -> Result<(), Self::Error>;

    /// Write `words` to the slave, ignoring all the incoming words
    ///
    /// Implementations are allowed to return before the operation is
    /// complete. See (the docs on embedded-hal)[embedded_hal::spi] for details on flushing.
    async fn write(&mut self, words: &[Word]) -> Result<(), Self::Error>;

    /// Write and read simultaneously. `write` is written to the slave on MOSI and
    /// words received on MISO are stored in `read`.
    ///
    /// It is allowed for `read` and `write` to have different lengths, even zero length.
    /// The transfer runs for `max(read.len(), write.len())` words. If `read` is shorter,
    /// incoming words after `read` has been filled will be discarded. If `write` is shorter,
    /// the value of words sent in MOSI after all `write` has been sent is implementation-defined,
    /// typically `0x00`, `0xFF`, or configurable.
    ///
    /// Implementations are allowed to return before the operation is
    /// complete. See (the docs on embedded-hal)[embedded_hal::spi] for details on flushing.
    async fn transfer(&mut self, read: &mut [Word], write: &[Word]) -> Result<(), Self::Error>;

    /// Write and read simultaneously. The contents of `words` are
    /// written to the slave, and the received words are stored into the same
    /// `words` buffer, overwriting it.
    ///
    /// Implementations are allowed to return before the operation is
    /// complete. See (the docs on embedded-hal)[embedded_hal::spi] for details on flushing.
    async fn transfer_in_place(&mut self, words: &mut [Word]) -> Result<(), Self::Error>;

    /// Wait until all operations have completed and the bus is idle.
    ///
    /// See (the docs on embedded-hal)[embedded_hal::spi] for information on flushing.
    async fn flush(&mut self) -> Result<(), Self::Error>;
}

impl<T: SpiBus<Word>, Word: 'static + Copy> SpiBus<Word> for &mut T {
    async fn read(&mut self, words: &mut [Word]) -> Result<(), Self::Error> {
        T::read(self, words).await
    }

    async fn write(&mut self, words: &[Word]) -> Result<(), Self::Error> {
        T::write(self, words).await
    }

    async fn transfer(&mut self, read: &mut [Word], write: &[Word]) -> Result<(), Self::Error> {
        T::transfer(self, read, write).await
    }

    async fn transfer_in_place(&mut self, words: &mut [Word]) -> Result<(), Self::Error> {
        T::transfer_in_place(self, words).await
    }

    async fn flush(&mut self) -> Result<(), Self::Error> {
        T::flush(self).await
    }
}

/// Error type for [`ExclusiveDevice`] operations.
#[derive(Copy, Clone, Eq, PartialEq, Debug)]
pub enum ExclusiveDeviceError<BUS, CS> {
    /// An inner SPI bus operation failed
    Spi(BUS),
    /// Asserting or deasserting CS failed
    Cs(CS),
}

impl<BUS, CS> Error for ExclusiveDeviceError<BUS, CS>
where
    BUS: Error + Debug,
    CS: Debug,
{
    fn kind(&self) -> ErrorKind {
        match self {
            Self::Spi(e) => e.kind(),
            Self::Cs(_) => ErrorKind::ChipSelectFault,
        }
    }
}

/// [`SpiDevice`] implementation with exclusive access to the bus (not shared).
///
/// This is the most straightforward way of obtaining an [`SpiDevice`] from an [`SpiBus`],
/// ideal for when no sharing is required (only one SPI device is present on the bus).
pub struct ExclusiveDevice<BUS, CS, D> {
    bus: BUS,
    cs: CS,
    delay: D,
}

impl<BUS, CS, D> ExclusiveDevice<BUS, CS, D> {
    /// Create a new ExclusiveDevice
    pub fn new(bus: BUS, cs: CS, delay: D) -> Self {
        Self { bus, cs, delay }
    }
}

impl<BUS, CS, D> ErrorType for ExclusiveDevice<BUS, CS, D>
where
    BUS: ErrorType,
    CS: OutputPin,
{
    type Error = ExclusiveDeviceError<BUS::Error, CS::Error>;
}

impl<Word: Copy + 'static, BUS, CS, D> blocking::SpiDevice<Word> for ExclusiveDevice<BUS, CS, D>
where
    BUS: blocking::SpiBus<Word>,
    CS: OutputPin,
    D: embedded_hal::delay::DelayUs,
{
    fn transaction(&mut self, operations: &mut [Operation<'_, Word>]) -> Result<(), Self::Error> {
        self.cs.set_low().map_err(ExclusiveDeviceError::Cs)?;

        let op_res = 'ops: {
            for op in operations {
                let res = match op {
                    Operation::Read(buf) => self.bus.read(buf),
                    Operation::Write(buf) => self.bus.write(buf),
                    Operation::Transfer(read, write) => self.bus.transfer(read, write),
                    Operation::TransferInPlace(buf) => self.bus.transfer_in_place(buf),
                    Operation::DelayUs(us) => match self.bus.flush() {
                        Err(e) => Err(e),
                        Ok(()) => {
                            self.delay.delay_us(*us);
                            Ok(())
                        }
                    },
                };
                if let Err(e) = res {
                    break 'ops Err(e);
                }
            }
            Ok(())
        };

        // On failure, it's important to still flush and deassert CS.
        let flush_res = self.bus.flush();
        let cs_res = self.cs.set_high();

        op_res.map_err(ExclusiveDeviceError::Spi)?;
        flush_res.map_err(ExclusiveDeviceError::Spi)?;
        cs_res.map_err(ExclusiveDeviceError::Cs)?;

        Ok(())
    }
}

impl<Word: Copy + 'static, BUS, CS, D> SpiDevice<Word> for ExclusiveDevice<BUS, CS, D>
where
    BUS: SpiBus<Word>,
    CS: OutputPin,
    D: DelayUs,
{
    async fn transaction(
        &mut self,
        operations: &mut [Operation<'_, Word>],
    ) -> Result<(), Self::Error> {
        self.cs.set_low().map_err(ExclusiveDeviceError::Cs)?;

        let op_res = 'ops: {
            for op in operations {
                let res = match op {
                    Operation::Read(buf) => self.bus.read(buf).await,
                    Operation::Write(buf) => self.bus.write(buf).await,
                    Operation::Transfer(read, write) => self.bus.transfer(read, write).await,
                    Operation::TransferInPlace(buf) => self.bus.transfer_in_place(buf).await,
                    Operation::DelayUs(us) => match self.bus.flush().await {
                        Err(e) => Err(e),
                        Ok(()) => {
                            self.delay.delay_us(*us).await;
                            Ok(())
                        }
                    },
                };
                if let Err(e) = res {
                    break 'ops Err(e);
                }
            }
            Ok(())
        };

        // On failure, it's important to still flush and deassert CS.
        let flush_res = self.bus.flush().await;
        let cs_res = self.cs.set_high();

        op_res.map_err(ExclusiveDeviceError::Spi)?;
        flush_res.map_err(ExclusiveDeviceError::Spi)?;
        cs_res.map_err(ExclusiveDeviceError::Cs)?;

        Ok(())
    }
}