Struct d1_pac::pwm::cisr::R

pub struct R(/* private fields */);

Register cisr reader

Implementations

impl R

pub unsafe fn cris(&self, n: u8) -> CRIS_R

Status of the capture channel rising lock interrupt

When the capture channel captures rising edge, if the rise lock interrupt ( CRIE ) is enabled, this bit is set 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cris0(&self) -> CRIS_R

Bit 0 - Status of the capture channel rising lock interrupt

When the capture channel captures rising edge, if the rise lock interrupt ( CRIE ) is enabled, this bit is set 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cris1(&self) -> CRIS_R

Bit 2 - Status of the capture channel rising lock interrupt

When the capture channel captures rising edge, if the rise lock interrupt ( CRIE ) is enabled, this bit is set 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cris2(&self) -> CRIS_R

Bit 4 - Status of the capture channel rising lock interrupt

When the capture channel captures rising edge, if the rise lock interrupt ( CRIE ) is enabled, this bit is set 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cris3(&self) -> CRIS_R

Bit 6 - Status of the capture channel rising lock interrupt

When the capture channel captures rising edge, if the rise lock interrupt ( CRIE ) is enabled, this bit is set 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cris4(&self) -> CRIS_R

Bit 8 - Status of the capture channel rising lock interrupt

When the capture channel captures rising edge, if the rise lock interrupt ( CRIE ) is enabled, this bit is set 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cris5(&self) -> CRIS_R

Bit 10 - Status of the capture channel rising lock interrupt

When the capture channel captures rising edge, if the rise lock interrupt ( CRIE ) is enabled, this bit is set 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cris6(&self) -> CRIS_R

Bit 12 - Status of the capture channel rising lock interrupt

When the capture channel captures rising edge, if the rise lock interrupt ( CRIE ) is enabled, this bit is set 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cris7(&self) -> CRIS_R

Bit 14 - Status of the capture channel rising lock interrupt

When the capture channel captures rising edge, if the rise lock interrupt ( CRIE ) is enabled, this bit is set 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub unsafe fn cfis(&self, n: u8) -> CFIS_R

Status of the capture channel falling lock interrupt

When the capture channel captures falling edge, if the fall lock interrupt ( CFIE ) is enabled, this bit is set to 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cfis0(&self) -> CFIS_R

Bit 1 - Status of the capture channel falling lock interrupt

When the capture channel captures falling edge, if the fall lock interrupt ( CFIE ) is enabled, this bit is set to 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cfis1(&self) -> CFIS_R

Bit 3 - Status of the capture channel falling lock interrupt

When the capture channel captures falling edge, if the fall lock interrupt ( CFIE ) is enabled, this bit is set to 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cfis2(&self) -> CFIS_R

Bit 5 - Status of the capture channel falling lock interrupt

When the capture channel captures falling edge, if the fall lock interrupt ( CFIE ) is enabled, this bit is set to 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cfis3(&self) -> CFIS_R

Bit 7 - Status of the capture channel falling lock interrupt

When the capture channel captures falling edge, if the fall lock interrupt ( CFIE ) is enabled, this bit is set to 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cfis4(&self) -> CFIS_R

Bit 9 - Status of the capture channel falling lock interrupt

When the capture channel captures falling edge, if the fall lock interrupt ( CFIE ) is enabled, this bit is set to 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cfis5(&self) -> CFIS_R

Bit 11 - Status of the capture channel falling lock interrupt

When the capture channel captures falling edge, if the fall lock interrupt ( CFIE ) is enabled, this bit is set to 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cfis6(&self) -> CFIS_R

Bit 13 - Status of the capture channel falling lock interrupt

When the capture channel captures falling edge, if the fall lock interrupt ( CFIE ) is enabled, this bit is set to 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

pub fn cfis7(&self) -> CFIS_R

Bit 15 - Status of the capture channel falling lock interrupt

When the capture channel captures falling edge, if the fall lock interrupt ( CFIE ) is enabled, this bit is set to 1 by hardware. Writing 1 to clear this bit.

Reads 0: The capture channel interrupt is not pending.

Reads 1: The capture channel interrupt is pending.

Writes 0: no effect.

Writes 1: Clear the status of the capture channel interrupt.

Methods from Deref<Target = R<CISR_SPEC>>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<CISR_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<R<CISR_SPEC>> for R

fn from(reader: R<CISR_SPEC>) -> Self

Converts to this type from the input type.